Printed Carton Specification

This article describes Printed Carton Specification. Which is used pack the Blister, strip, Tubes, Vials, Ampules during packing operation.

Printed Carton Specification

Product Information :

Supplier / Manufacturer : As per approved vendor list
Sampling Procedure: Sampling to be performed as per current version of SOP.
Sample Quantity : 20 Carton
Testing procedure: Testing to be performed as per STP
Item code As per SOP
Storage Condition: Controlled Room temperature
Sampling and Handling Precautions

 (If Any):

Use personal protective equipments while handling the material.

Printed Carton Specification:

Sr. No. Test Specification Reference
1. Description * UV Varnish carton, Top Tuck & Bottom Tuck system Printing matter printed on outer side. IH
2. Board quality Should be in accordance with approved sample, white back board with Aqua varnish. Board should have white finish & not dull or Yellowish IH
3. Text Matter * As per Approved artwork. IH
4. Length (mm) 120  mm ± 1 mm IH
5. Width (mm) 18  mm ± 1 mm IH
6. Height (mm) 65 mm ± 1 mm IH
7. Side pasting Should be perfect IH
8. Lock-bottom pasting Should be perfect IH
9. Inter locking Should be perfect IH
10. Colour scheme Should be comply as per approved shade card. IH
11. Creasing Should be perfect IH
12. Printing quality Should be legible and clear IH
13. Grammage Not less than 300 gsm IH

Remark: * Test to be carried out for Retesting of Packing Material.


III. Revision History:

Version Number Reason for Revision Change control Number  Effective Date


You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *